Anderson Greenwood OEM Parts

We Accept

 

Detailed Diagrams of in-stock spare part model numbers

    • 333 423
    • 334 433

Types 81 and 83 High Performance Safety Valves:

Features: Types 81 and 83 are direct spring operated valves designed with special patented internals and soft seats to provide superior performance. This range is capable of solving the most difficult pressure relief problems with valves suitable for gas vapor, and steam service. Type 81 and 83 valves carry the ASME Section VIII Code Stamp.

Specifications
Orifice Sizes 0.49 in2 (0.32 cm2) and D through J
Connections 1/2″ x 3/4″ to 2″ x 3″
Inlet Flange Ratings ANSI 150, 300, 600, 900, 1500, 2500
Maximum Temperature 515° (269°)
Minimum Pressure 20 psig (1.4 barg)
Maximum Pressure 10,000 psig (690 barg)

Type 81P Relief Valves for Liquid Service

Features: The Type 81P is a fully back pressure balanced, direct spring operated valve designed specially for liquid service. The valve is fully open at only 10% overpressure and has a pressure-loaded spindle ring to ensure stability with no chatter.

Specifications
Orifice Sizes 0.049 in2 (0.32 cm2) and D through J
Connections 3/4″ x 1″ to 2″ x 3″
Inlet Flange Ratings ANSI 150, 300, 600, 900, 1500, 2500
Maximum Temperature 400°F (204°C)
Minimum Pressure 50 psig (
Temperature (max) 1,000° F (538° C)

Series 200 Pilot Operated Pressure Relief Valves

Features: The Series 200 is a no-flow, pop action POPRV design principally intended for gas applications. Suitable for severe service where dirt, hydrates and high moisture levels occur in the fluid media, the Series 200 is the industry standard for pop action POPRVs.

Specifications
Orifice Sizes D through T, Full Bore valves also available
Connections 1: x 2″ to 8″ x 10″ (8″ x 10″ x 10″ for full bore)
Inlet Flange Ratings ANSI 105, 300, 600, 900, 1500, 2500
Temperature Range -423°F to +500°F (-253° to +260°C)
Minimum Pressure 25 psig (1.72 barg)
Maximum Pressure 10,000 psig (690 brag)

Series 400 Pressure Relief Valves

Features: The Series 400 is a no-flow, modulating action POPRV design suitable for gas, liquid and two-phase applications. The Series 400 represents the very best state-of-the-art technology providing safety relief valve performance not possible from direct spring PRV’s.

Specifications
Orifice Sizes D through T, Full Bore valves also available
Connections 1″ x 2″ to 8″ x 10″ (8″ x 10″ x 10″ for full bore)
Inlet Flange Ratings ANSI 150, 300, 600, 900, 1500, 2500
Temperature Range -423°F to +500°F (-253°C to +260°C)
Minimum Pressure 15 psig (1/03 barg)
Maximum Pressure 6,000 psig (414 barg)

Type 727 High Temperature POPRV

Features: The Type727 safety valve has been specifically designed to provide a valve with premium seat tightness on high temperature gas and steam service. The 727 has all metal seating surfaces and is ASME Section VIII Code Stamped.

Specifications
Connections 1/2″, 1″, 2″ threaded (NPT) and flanged ANSI 150, 300, 600
Temperature Range -20°F to +300°F (-29°C to +149¯C)
Maximum Inlet Pressure 200 psig (14 barg)
Blanket Pressure Range 0.5″ wc to 6 psig (12.7 mm wc to 0.4 barg)

Series 90/9000 Low Pressure POPRVS

Features: Designed for cryogenic and non-cryogenic storage tanks the Anderson, Greenwood Series 90/9000 POPRVs provide extremely accurate valve setting and ultra sensitive response with set pressure as low as 4″wc (10 mbarg). The Series 9000 is also available as a pilot operated vacuum breaker for highly sensitive and air-tight vacuum service.

Specifications
Connections 2″ x 3″ to 12″ x 16″
Inlet Flange Ratings ANSI 125, 150
Temperature Range -320°F to +200°F (-296°C to +93°C)
Minimum Pressure 4″ wc (10 mbarg)

Safety Selector Valves:

Features: The Anderson, Greenwood Safety Selector Valve (SSV) is a unique device, developed to provide a safe and efficient method of switching from an active PRV to a standby PRV. The SSV has less than 3% pressure drop to the active PRV inlet, in accordance with ASME Section VIII Code and API RP520 Part II. The SSV is provided with a ‘foolproof’ locking mechanism. Tandem Safety Selector Valve systems are available which allow positive and simultaneous switching of both inlet and outlet SSV’s while maintaining overpressure protection at all times.

Specifications
Connections 1″ to 8″
Flange Ratings ANSI 150, 300, 600, 900, 1500, 2500
Temperature Range -423°F to +800°F (-253°C to +427°C)
Minimum Inlet Pressure 6,000 psig (414 barg)

Tank Blanketing Regulators

Features: Tank Blanketing provides an inert gas blanket over the liquid in a liquid storage tank. The Anderson, Greenwood Trans-Zero Regulator is a pilot operated, dome-loaded diaphragm type regulator capable of reducing blanketing gas from 14 barg to 12.5 mm wc in a single step providing bubble-tight shut off and low maintenance costs.

Specifications
Connections 1/2″, 1″, 2″ threaded (NPT) and flanged ANSI 150, 300, 600
Temperature Range -20°F to +300°F (-29°C to +149¯C)
Maximum Inlet Pressure 200 psig (14 barg)
Blanket Pressure Range 0.5″ wc to 6 psig (12.7 mm wc to 0.4 barg)

9700 Severe Service Vent

Features: Tank Blanketing provides an inert gas blanket over the liquid in a liquid storage tank. The Anderson, Greenwood Trans-Zero Regulator is a pilot operated, dome-loaded diaphragm type regulator capable of reducing blanketing gas from 14 barg to 12.5 mm wc in a single step providing bubble-tight shut off and low maintenance costs.

Specifications
Sizes 12″, 18″, 20″, 24″
Temperature Range -20°F to +250°F (-29°C to +121¯C)
Pressure Range 4: wc to 1 psig (10 mbarg to 69 mbarg)
Vacuum Setting 1 oz, 2 oz, 3 oz, 4 oz (4.3 mbarg, 8.6 mbarg, 12.9 mbarg, 17.2 mbarg)